Engineering Answer: A 24V Nominal (25.6V 8S LiFePO4) battery system cuts DC cable amperage in half compared to 12.8V systems and minimizes resistive voltage drop on 2,000W–4,000W inverters, 24V marine trolling motors (80–101 lb thrust), RV house banks, and commercial floor scrubbers. You can build or deploy a 25.6V system either as an 8S1P single string (using 50Ah to 314Ah cells) oder an en 8S2P parallel-series configuration for double capacity and current delivery.
1. Complete HYXin 24V / 25.6V Deep-Cycle LiFePO4 Battery Pack Lineup (50Ah to 314Ah)
| Modell & Kapazitéit | Nominell Volt / Energie | Recommended Inverter / Load | Key Protection & Eegeschaften | Produit Säit |
|---|---|---|---|---|
| 24V 50Ah LiFePO4 Pack | 25.6VR / 1,280 Wh | 24V trolling motors, mobility scooters, solar gates | Lightweight deep-cycle BMS protection | 24V 50Ah Prismatic LiFePO4 Battery Pack |
| 24V 100Ah LiFePO4 Pack | 25.6VR / 2,560 Wh | 2,000W off-grid solar inverter, 24V marine house bank | 100A BMS, 4,000–6,000 deep cycles | 24V 100Ah Deep-Cycle LiFePO4 Battery Pack |
| 25.6V 200Ah Smart BT Pack | 25.6VR / 5,120 Wh | 3,000W RV/cabin solar inverter, Bluetooth SOC monitoring | 200A Smart BMS with Bluetooth App | 25.6V 200Ah LiFePO4 Battery Pack w/ Bluetooth |
| 24V 280Ah Marine & Cranking Pack | 25.6VR / 7,168 Wh | Boat cranking & thruster bank, mobile power stations | Grade A 280Ah prismatic cells, high surge capability | 24V 280Ah Marine & Power Station LiFePO4 Battery |
| 25.6V 300Ah Household & RV Pack | 25.6VR / 7,680 Wh | 3,500W–4,000W off-grid cabin & motorhome ESS | 7.68kWh ultra-capacity 8S module | 25.6V 300Ah Deep-Cycle LiFePO4 Battery Pack |
| 24V 314Ah Ultra-Performance Pack | 25.6VR / 8,038 Wh | Commercial marine workboats, UPS power stations | Built with Grade A+ 314Ah cells (8.04kWh per pack) | 24V 314Ah Marine & UPS LiFePO4 Battery |
2. 8S1P vs. 8S2P Battery Configuration: Wiring & Charging Voltage Parameters
- 25.6VR (8S) Charge Profil: Bulk/Absorption voltage = 28.8V – 29.2V (3.60V–3.65V/cell); Float voltage = 27.0V – 27.2V (3.38V–3.40V/cell); Low-voltage cutoff = 20.0V – 21.6V.
- When to Use 8S1P vs. 8S2P: Instead of wiring sixteen 100Ah cells in 8S2P (25.6V 200 Ah), choosing a single 8S1P pack built with 25.6V 200 Ah, 24V 280Ah, oder 24V 314Ah cells halves interconnect count. For 15kWh+ 25.6V marine banks, wire two 25.6V 300Ah/314Ah packs in parallel (8S2P) using equal-length diagonal busbars. Check exact wire gauges in our Serie vs. Parallel Battery Wiring Calculator.