When pairing a 15kWh, 51.2V battery with an inverter, yana da mahimmanci a yi la'akari da halayen baturin, load bukatun, da tsarin dacewa. Below are the detailed selection steps and key parameters:
1. Ensure Voltage Compatibility Between Battery and Inverter
-
Tashar Vat: 51.2V (maras tushe), with an actual operating range typically between 44V–58.4V (E.g., for a 14S LiFePO₄ battery at 3.2V per cell).
-
Inverter Input Voltage Range: Must fully cover the battery’s charge/discharge range (E.g., 40V–60V DC). An incompatible range may cause inverter failure or battery damage.
2. Calculate Inverter Power Requirements
-
Koyarwar baturi: 15kWh (energy unit). Match the inverter’s power to the load and runtime.
-
Misali: Don 5kW total load, select an inverter with ≥5kW rated power, plus 20% margin (i.e., 6Kwat) to handle surges.
-
For high-startup-power devices (E.g., motoci), choose an inverter with higher surge capacity (E.g., a 6kW inverter with 12kW peak power).
-
3. Select Inverter Type
-
Off-Grid Inverter (mandatory): Required for battery systems, as it converts DC from the battery to AC.
-
Hybrid Inverter (ba na tilas ba ne): If future solar expansion is planned, choose a hybrid model supporting both battery and PV input (E.g., Growatt SPF 5000 ES).
4. Key Parameter Checklist
| Misali | Requirement | Example Value |
|---|---|---|
| Input Voltage Range (VDC) | Must cover battery voltage (E.g., 40V–60V) | 45V–60V |
| Rated Output Power (Kwat) | ≥ Total load power × 1.2 | 6Kwat (for 5kW load) |
| Output Waveform | Pure sine wave (for sensitive electronics) | Pure sine wave |
| Surge Power | ≥ Maximum device startup power (E.g., 3× motor current) | 12Kwat (domin 5 sec) |
| Charge/Discharge Management (ba na tilas ba ne) | Supports battery charging (if integrated) | Max charge current: 100A |
| Battery Chemistry Compatibility | Matches battery type (E.g., LiFePO₄) | LiFePO₄ (51.2V) |
| inganci | ≥90% (preferably >95%) | 96% |
| Sadarwar Sadarwa | RS485/CAN, supports BMS communication | Pylontech/JBD protocol |
5. Ƙarin La'akari
-
Caji/Cire Yanzu:
-
For inverters with integrated chargers, calculate max current.
-
15kWh battery @51.2V ≈ 293Ah (15000Wh ÷ 51.2V).
-
Recommended charge/discharge current ≤0.5C (i.e., ≤146A) to prevent overheating.
-
-
-
BMS Communication:
-
Prioritize inverters compatible with the battery’s BMS protocol (E.g., Pylontech, Daly) for precise control.
-
-
Cooling & Kariya:
-
High-power inverters require forced cooling (note noise); outdoor units need ≥IP65 rating.
-
Recommended Inverter Models
-
Low-Voltage Off-Grid:
-
Victron MultiPlus 48V/5000VA (5Kwat, pure sine wave, LiFePO₄ BMS support).
-
MPP Solar LVX 6048 (6Kwat, 48V input, compatible with lead-acid/LiFePO₄).
-
-
Hybrid:
-
Deye SUN-6K-SG01LP1 (6Kwat, supports PV + baturi, 51.2V LiFePO₄).
-
Taƙaitawa
-
Voltage Match: Inverter input range must cover the battery’s 51.2V charge/discharge range.
-
Power Rating: Select rated power ≥1.2× total load, and verify surge capacity.
-
Future-Proofing: Opt for a hybrid inverter if solar expansion is planned.
-
Battery Protection: Ensure BMS communication to prevent overcharge/discharge.
