When pairing a 15किलोवाट, 51.2वी बैटरी with an inverter, बैटरी की विशेषताओं पर विचार करना आवश्यक है, लोड आवश्यकताएँ, और सिस्टम अनुकूलता. Below are the detailed selection steps and key parameters:
1. Ensure Voltage Compatibility Between Battery and Inverter
-
बैटरी वोल्टेज: 51.2वी (नाममात्र), with an actual operating range typically between 44वी-58.4वी (उदा।, for a 14S LiFePO₄ battery at 3.2V per cell).
-
Inverter Input Voltage Range: Must fully cover the battery’s charge/discharge range (उदा।, 40V–60V DC). An incompatible range may cause inverter failure or battery damage.
2. Calculate Inverter Power Requirements
-
बैटरी की क्षमता: 15किलोवाट (energy unit). Match the inverter’s power to the load and runtime.
-
उदाहरण: एक के लिए 5kW total load, select an inverter with ≥5kW rated power, plus 20% अंतर (i.e., 6किलोवाट) to handle surges.
-
For high-startup-power devices (उदा।, मोटर्स), choose an inverter with higher surge capacity (उदा।, a 6kW inverter with 12kW peak power).
-
3. Select Inverter Type
-
Off-Grid Inverter (mandatory): Required for battery systems, as it converts DC from the battery to AC.
-
हाइब्रिड इन्वर्टर (वैकल्पिक): If future solar expansion is planned, choose a hybrid model supporting both battery and PV input (उदा।, Growatt SPF 5000 ES).
4. Key Parameter Checklist
| पैरामीटर | Requirement | Example Value |
|---|---|---|
| Input Voltage Range (VDC) | Must cover battery voltage (उदा।, 40V–60V) | 45V–60V |
| Rated Output Power (किलोवाट) | ≥ Total load power × 1.2 | 6किलोवाट (for 5kW load) |
| Output Waveform | Pure sine wave (for sensitive electronics) | Pure sine wave |
| उछाल शक्ति | ≥ Maximum device startup power (उदा।, 3× motor current) | 12किलोवाट (for 5 सेकंड) |
| Charge/Discharge Management (वैकल्पिक) | Supports battery charging (if integrated) | Max charge current: 100ए |
| Battery Chemistry Compatibility | Matches battery type (उदा।, LiFePO₄) | LiFePO₄ (51.2वी) |
| क्षमता | ≥90% (preferably >95%) | 96% |
| संचार इंटरफेस | RS485/CAN, supports BMS communication | Pylontech/JBD protocol |
5. अतिरिक्त मुद्दो पर विचार करना
-
Charge/Discharge Current:
-
For inverters with integrated chargers, calculate max current.
-
15kWh battery @51.2V ≈ 293Ah (15000Wh ÷ 51.2V).
-
Recommended charge/discharge current ≤0.5C (i.e., ≤146A) to prevent overheating.
-
-
-
BMS Communication:
-
Prioritize inverters compatible with the battery’s BMS protocol (उदा।, Pylontech, Daly) for precise control.
-
-
Cooling & Protection:
-
High-power inverters require forced cooling (note noise); outdoor units need ≥IP65 rating.
-
Recommended Inverter Models
-
Low-Voltage Off-Grid:
-
Victron MultiPlus 48V/5000VA (5किलोवाट, pure sine wave, LiFePO₄ BMS support).
-
MPP Solar LVX 6048 (6किलोवाट, 48V input, compatible with lead-acid/LiFePO₄).
-
-
Hybrid:
-
Deye SUN-6K-SG01LP1 (6किलोवाट, supports PV + बैटरी, 51.2V LiFePO₄).
-
सारांश
-
Voltage Match: Inverter input range must cover the battery’s 51.2V charge/discharge range.
-
Power Rating: Select rated power ≥1.2× total load, and verify surge capacity.
-
Future-Proofing: Opt for a hybrid inverter if solar expansion is planned.
-
Battery Protection: Ensure BMS communication to prevent overcharge/discharge.
